global positioning system
The Global Positioning System, usually called GPS, is the only fully-functional satellite navigation system. A constellation of more than two dozen GPS satellites broadcasts precise timing signals by radio to GPS receivers, allowing them to accurately determine their location (longitude, latitude, and altitude) in any weather, day or night, anywhere on Earth.
GPS has become a vital global utility, indispensable for modern navigation on land, sea, and air around the world, as well as an important tool for map-making, and land surveying. GPS also provides an extremely precise time reference, required for telecommunications and some scientific research, including the study of earthquakes.
United States Department of Defense developed the system, officially named NAVSTAR GPS (Navigation Signal Timing and Ranging GPS), and the satellite constellation is managed by the 50th Space Wing at Schriever Air Force Base. Although the cost of maintaining the system is approximately US$400 million per year, including the replacement of aging satellites, GPS is available for free use in civilian applications as a public good.
In late 2005, the first in a series of next-generation GPS satellites was added to the constellation, offering several new capabilities, including a second civilian GPS signal called L2C for enhanced accuracy and reliability. In the coming years, additional next-generation satellites will increase coverage of L2C and add a third and fourth civilian signal to the system, as well as advanced military capabilities.
The Wide-Area Augmentation System (WAAS), available since August 2000, increases the accuracy of GPS signals to within 2 meters (6 ft) [1] for compatible receivers. GPS accuracy can be improved further, to about 1 cm (half an inch) over short distances, using techniques such as Differential GPS (DGPS).
GPS allows accurate targeting of cruise missiles and precision-guided munitions (or "smart bombs"), as well as improved command and control of forces through improved locational awareness. GPS increases the accuracy of submarine launched ballistic missiles, since knowing the exact launching position allows for more accurate targeting of the missile. The satellites also carry nuclear detonation detectors, which form a major portion of the United States Nuclear Detonation Detection System. Commercial civilian GPS receivers are required to have limits on the velocities and altitudes at which they will report coordinates; this is to prevent them from being used to create improvised missiles.
GPS is used by people around the world as a navigation aid in cars, airplanes, and ships. The system can also be used by computer controlled harvesters, mine trucks and other vehicles. Hand-held GPS receivers can be used by mountain climbers and hikers. Glider pilots use the logged signal to verify their arrival at turnpoints in competitions. Low cost GPS receivers are often combined in a bundle with a PDA, car computer, or vehicle tracking system.
More costly and precise receivers are used by land surveyors to locate boundaries, structures, and survey markers, and for road construction.
For information about navigation systems for the visually impaired, including MoBIC, Drishti, Brunel Navigation System for the Blind, NOPPA, BrailleNote GPS, and Trekker, refer to the main article GPS for the visually impaired.
The availability of hand-held GPS receivers for a cost of about $90 and up (as of March 2005) has led to recreational applications including Geocaching. Geocaching involves using a hand-held GPS unit to travel to a specific longitude and latitude to search for objects hidden by other Geocachers. This popular activity often includes walking or hiking to natural locations.
Most airlines allow private use of ordinary GPS units on their flights, except during landing and take-off, like all other electronic devices. Additionally, some airline companies disallow use of hand-held receivers for security reasons, such as unwillingness to let ordinary passengers track the flight route. On the other extreme, some airlines integrate GPS tracking of the aircraft into their aircraft's seat-back television entertainment systems, available even during takeoff and landing to all passengers.
Many synchronization systems use GPS as a source of accurate time, hence one of the most common applications of this use is that of GPS as a reference clock for time code generators or NTP clocks. For instance, when deploying sensors (for seismology or other monitoring application), GPS may be used to provide each recording apparatus with some precise time source, so that the time of events may be recorded accurately.
The atomic clocks on the satellites are set to "GPS time", which is the number of seconds since 00:00:00 UTC, January 6, 1980. Today, GPS time is 14 seconds ahead [2] of UTC, because it does not follow leap seconds. Receivers thus apply a clock-correction offset (which is periodically transmitted along with the other data) in order to display UTC correctly, and optionally adjust for a local time zone. New GPS units will initially show the incorrect time after achieving a GPS lock for the first time. However, this is usually corrected on the display within 15 minutes once the UTC offset message is received for the first time.
The GPS system uses a satellite constellation of 24 satellites in intermediate circular orbits. The orbits are designed so at least four satellites are always within line of sight from almost any place on earth. [4] Each satellite circles the Earth twice each day at an altitude of 20,200 kilometres (12,600 miles). There are four satellites in each of six orbital planes. The constellation also includes three spare satellites in orbit. Each orbit is inclined 55 degrees from the equatorial plane, and the right ascension of the ascending nodes are separated by sixty degrees.
The flight paths of the satellites are measured by five monitor stations around the world (Hawaii, Kwajalein, Ascension Island, Diego Garcia, Colorado Springs). The master control station, at Schriever AFB, processes their combined observations and sends updates to the satellites through the stations at Ascension Island, Diego Garcia, Kwajalein. The updates synchronize the atomic clocks onboard each satellite to within one microsecond, and also adjust the ephemeris of the satellites' internal orbital model to match the observations of the satellites from the ground.
Each satellite repeatedly re-broadcasts the exact time according to its internal atomic clock along with a digital data packet. The data includes the orbital elements of the satellite's precise position, satellite status messages, and an almanac of the approximate position of every other active GPS satellite. The almanac lets GPS receivers use data from the strongest satellite signal to locate other satellites.
GPS receivers calculate their current position (latitude, longitude, elevation), and the precise time, using the process of trilateration after measuring the distance to at least four satellites by comparing the satellites' coded time signal transmissions. The receiver calculates the orbit of each satellite based on information encoded in their radio signals, and measures the distance to each satellite, called a pseudorange, based on the time delay from when the satellite signals were sent until they were received.
In order to measure the delay, the satellite repeatedly sends a 1,023 bit long pseudo random sequence; the receiver calculates an identical sequence from a known seed number, and shifts it until the two sequences match. Each satellite uses a different sequence, which lets them share the same radio frequencies, using Code Division Multiple Access, while still allowing receivers to identify each satellite.
Once the location and distance of each satellite is known, the receiver should theoretically be located at the intersection of four imaginary spheres, one around each satellite, with a radius equal to the time delay between the satellite and the receiver multiplied by the speed of the radio signals. In practice, GPS calculations are more complex for several reasons. One complication is that GPS receivers do not have atomic clocks, so the precise time is not known when the signals arrive. Fortunately, even the relatively simple clock within the receiver provides an accurate comparison of the timing of the signals from the different satellites. The receiver is able to determine exactly when the signals were received by adjusting its internal clock (and therefore the spheres' radii) so that the spheres intersect near one point.
One of biggest problems for GPS accuracy is that changing atmospheric conditions change the speed of the GPS signals unpredictably as they pass through the ionosphere. The effect is minimized when the satellite is directly overhead and becomes greater toward the horizon, as the satellite signals must travel through the greater "thickness" of the ionosphere as the angle increases. Once the receiver's rough location is known, an internal mathematical model can be used to estimate and correct for the error.
Because ionospheric delay affects the speed of radio waves differently based on their frequencies, a second frequency band was added to help eliminate this type of error. Newer GPS receivers can compare the phase difference between the L1 and L2 frequencies to actually measure the atmospheric effects on the signals and apply precise corrections.[citation needed]
GPS signals can also be affected by multipath reflections of the radio signals off the ground and/or surrounding structures (buildings, canyon walls, etc). For long delay multipath signals, the receiver itself can filter the signals out. A variety of receiver techniques, most notably Narrow Correlator spacing, have been developed to mitigate multipath errors. For shorter delay multipath signals that result from reflections from the ground, special antenna features may be used such as a ground plane, or a choke ring antenna. Shorter multipath signals from ground reflections can often be very close to the direct signals, and can greatly reduce precision.
Some GPS receivers can relay position data to a PC or other device using the NMEA 0183 protocol. NMEA 2000is a newer and less widely adopted protocol. Both are proprietary, and are controlled on a for-profitbasis by the US-based National Marine Electronics Association. References to the NMEA protocols have been compiled from public records, allowing open source tools like gpsdto read the protocol without violating Intellectual property laws.
List of telephony terms:
3gpp - a-law - abbreviated dialing - adsl - ani - answering machine - apn - automatic ring back - b-channel - baud - bell 202 modem - bit rate - bonding - bri - busy signal - cable modem - call-progress tones - call accounting - call capture - call forwarding - call originator - call park - call pick-up - call transfer - call waiting - call waiting deluxe - called party - caller id - caller id spoofing - calling party - carrier wave - cbr - ccitt - cdma - cdma2000 - cellular repeater - celp - channel - clec - clock rate - codec - collect call - conference - conference call - crc - csd - d-channel - data compression - device driver - dial-up - dial - dial tone - direct-inward-dialing - direct distance dialing - distinctive ring - dnis - dsl - dsp - dtmf - dtr - duplex - echo cancellation - edge - extension - fax - fcc - fdma - fidonet - follow-me - g.711 - g.723.1 - g.723 - g.726 - g.lite - gprs - gps - gsm - h.323 - harmonic - headphones - hscsd - hspda - iad - idsn - internet call waiting - isp - ivr - jack plug - local loop - long distance - microcontroller - mobile phone - modem - modulation - mu-law - music-on-hold - night service - off-hook - on-hook - pabx - pager - payphone - pbx - pcm - pots - prank call - precise tone plan - pstn - pulse dialling - push to talk - ring modulation - ring tone - ringback - ringing signal - rj11 - roaming - serial communications - serial port - signal noise - sim - simplex - sit - sms - softmodem - switchboard operator - tapi - tdma - telecommunications - telemarketing - telephone - telephone call - telephone card - telephone company - telephone exchange - telephone line - telephone number - telephone numbering plan - telephone operator - telephone switchboard - telephony - tts - twisted pair - umts - v.32 - v.32bis - v.34 - v.42bis - vbr - vertical service code - voicemail - voip - vox - wap - wav - wi-fi - wimax - wire
Copyright © 1999-2010 SoftCab Inc. All Rights Reserved